• Language

High build 2-component aliphatic polyurethane top coat.
Excellent application by brush, roller or airless spray. Fireproof classification B, s1-d0.

  • Applicable up to 100 microns without sagging
  • Easy to apply manually by roller or brush
  • Good corrosion resistance in aggressive environments
  • Chemically resistant to splatters from fresh and sea water, solvents, oils, gasolines and mild chemicals splashes
  • Excellent gloss and colour retention
  • Resistant to yellowing and chalking
  • Cures at low temperatures (below 0ºC)
  • Long term overcoatability
  • Very good flexibility and adhesion
  • Available in any colour. Suitable for Tinting System


+ Certified to be used in C3 High aggressive environments according to norm UNE-EN ISO 12944 and tested according to norm UNE 48315-1.2011 as part of the system: EP06 (100 microns) + PU03 (60 microns).
+ Certified according to norm UNE-EN 13501-1:2007: fireproof euroclassification B, s1-d0; former M1 (UNE 23727:1990).


+ Suitable to be used indoors and outdoors, in workshops, new construction, on field and, specially, for maintenance where manual coating by brush or roller is required.
+ Can be applied over primer or intermediate coat.
+ For protection on metallic structures such as exterior of tanks and pipes, metallic profiles, bridges, handrails, industrial and agricultural machinery, etc.
+ In any kind of environments like marine platforms, off-shore, refineries, chemical premises, etc.
+ For floorings where a medium mechanical performance is needed.

Related products


>Paint efficiency calculation

Technical sheet (TDS)

Safety data sheet (MSDS)